 |
| 11 ways to keep your computer cool |
There are numerous electronic components on your PC. Almost all of them are hot on the computer. However, as the CPU and GPU work most in the field of work, these two components are still ahead in terms of heat generation. Heat emitting system is also good for a good PC. But if this system is not good for some reason, it can heat your PC if the heat generated does not go out and if it is exceeded, your PC may be damaged. So it's important to keep the PC cool. So let's take a look at the 10 effective tips to keep your PC cool.
1. Let the hot air go out
The easiest and first thing to do is let the air out of your PC's vent holes. Because PCs and GPUs have heat sync to keep cool. This heat sink accepts heat and sends it out through the cooling fan. But if there is a barrier around the air vents on your PC, that air can't go out. If the PC is placed on the wall then the PC should be kept at least a few inches away from the wall. Also, if you place the bottom of the table or desk, keep an eye on the door or lid of the section.
2. Keep the casing off the PC
Many people think that because the cooling of the PC's casing helps the hot air to come out, keeping the entire lid open of the casing will definitely make the hot air get better. The logic is OK! But keeping the lid open will allow more dust to pass through your CPU as well as more air. This will reduce the air flow through your cooling fan jam. So it is wise to keep casing off.
3. Clean the PC regularly
As the dust accumulates the fan jams, it is important to keep these clean regularly. The PC case should be opened at regular intervals to clean the whole. Many types of cleaners are available in the market for cleaning PCs and electronic devices. However, it is more effective to take it out of the room while cleaning the PC.
4. Remove the PC a little
Sometimes it may be that the corner of the room where your PC is located has a relatively high temperature, or it may even come directly from the outside. If this is the case, it would be best to remove the PC and move it to another part.
5. Put on a cooling fan of good quality
Cooling fan is often provided with your CPU casing or PSU. But these cooling fans are not overpowering. So if you want a good performance, you can buy one or more good quality cooling fan. Choose from many types of cooling fan in the market according to your budget and tastes.
6. Overclocking is not one at all
If those overclocking CPUs want to keep the PC cool, then stop overclocking (extraordinarily high performance in particular ways) now. Because overclocking directly affects the efficiency of the PC and your PC generates a lot of heat. If you want to overclocking, take the necessary cooling measures first.
7. Change the power supply unit itself
If you do not have a cooling fan on your PC case, then the fan with the power supply unit is the only reliance on keeping your PC cool. If you think its fan is not rotating at enough speed then you need to change the whole PSU (power supply unit) tie.
8. Separate fan for different component
Although your CPU is the one that generates the most heat, the GPU, RAM, storage etc. also produce enough heat as the current computer capacity increases. So if you can buy a dedicated fan for the component like GPU, memory, and install it, it is also good.
9. Water Cooling System
For modern powerful PCs, just passing the air through the fan is not enough. That's why you can install a water cooling system that absorbs heat through water and is much more efficient.
10. Phase Change Unit
This is a state-of-the-art cooling technology. This is basically a kind of refrigerator for the CPU. It uses the refrigerator system to cool the CPU. It even has the ability to freeze your CPU. However, because they are very expensive, there is no use on a personal level.
0 মন্তব্যসমূহ